测试方法 测试名称
Testing of resins,hardeners and accelerators,and accelerators resins
树脂,固化剂,催化剂和固化树脂的测试 DIN 16945,section 6.2 Temperature rise
Din 16945, 6.2 温升曲线
DIN 16945,section 6.3 Gel time
Din 16945,6.3 凝胶时间
DIN 16945,section 6.5 Determination of total volume shrinkage from change in density
Din 16945,6.5 体积收缩率
ISO 175
Plastics-Methods of test for the determination of the effects of immersion in liquid chemicals
《塑料 测定液体化学品对塑料影响的试验方法》
Effects of immersion in liquid chemicals of plastics
塑料耐化学品
ISO 1172
Textile-glass-reinforced plastics, prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods 《纺织玻璃纤维增强塑料、预浸料、模塑料和层压板 纺织玻璃纤维和矿物质填料含量的测定 煅烧法》
Fiber content
纤维含量
ISO 1183, method A
Plastics-Method for determining the density of non-cellular plastics-Part1:Immersion method,liquid pyknometer method and titration method
《塑料 非泡沫塑料密度的测定 第1部分:浸渍法、液体比重瓶法和滴定法》方法A
Density of non-cellular plastics
非泡沫塑料密度
ISO 1675
Liquid Resin—Determination of density by the pyknometer method《塑料 液体树脂密度的测定 比重瓶法》
Density by the pyknometer
液体树脂的密度
ISO 2114
Plastics-(polyester resins)and paints andpaints and varnishes(binders)-Determination of partial acid value and total acid value
塑料(聚酯树脂)、色漆和清漆(胶粘合剂) 部分酸值和总酸值的测定
酸值
ISO 2555
Plastics—Resin in the liquid state or as emulsions or dispersion—Determination of apparent viscosity by the Brookfield Test method 《塑料 树脂在液态或乳液或分散 表观粘度测定的布鲁克菲尔德测试方法》
Apparent viscosity of the liquid resin
液体树脂的表观粘度
ISO 3001
Plastics-Epoxy compounds-Determination of epoxy equivalent《塑料 环氧化合物 环氧当量的测定》
Epoxy equivalent of epoxy compounds
塑料环氧当量
ISO 3374
Reinforcement products - Mats and fabrics - Determination of mass per unit area 《增强制品 毡和织物 单位面积质量的测定》
Mass per unit area of reinforcement products
增强制品单位面积质量
ISO 4603
Textile glass; woven fabrics; determination of thickness 《纺织玻璃纤维 机织物 厚度的测定》
thickness of glass fiber fabrics
玻璃纤维织物厚度
ISO 75-1
Plastics-Determination of temperature of deflection under load--Part 1:General test method《塑料 负荷变形温度的测定 第1部分:通用试验方法》
Temperature of deflection under load of fiber-reinforced plastics
纤维增强塑料热变形温度
ISO 75-2
Plastics—Determination of temperature of deflection under load—Part2:Plastics and ebonite《塑料 负荷变形温度的测定 第2部分:塑料、硬橡胶和长纤增强复合材料》
Temperature of deflection under load of fiber-reinforced plastics
纤维增强塑料热变形温度
ISO 178
Plastic-Determination of flexural properties《塑料 弯曲性能的测定》
Flexural properties of plastics
塑料弯曲
ISO 527-1
Plastics -Determination of tensile properties -Part 1: General principles 塑料 拉伸性能的测定 第1部分:总则》
Tensile properties of plastics
塑料拉伸
ISO 527-2
Plastics -Determination of tensile properties -Part 2: Test conditions for moulding and extrusion plastics《塑料 拉伸性能的测定 第2部分:模塑和挤塑塑料的试验条件》
Tensile properties of plastics
塑料拉伸
ISO 527-4
Plastics-Determination of tensile properties-Part4:Test conditions for isotropic and orthotropic fibre-reinforced plastic composites《塑料 拉伸性能的测定 第4部分:各向同性和正交各向异性纤维增强复合材料的试验条件》
Plastics tensile
塑料拉伸
ISO 527-5
Plastics—Determination of tensile properties—Part 5:Test conditions for unidirectional fibre reinforced Plastic composites
《塑料 拉伸性能的测定 第5部分:单向纤维增强复合材料的试验条件》
Plastics tensile
塑料拉伸
ISO 14125, method A
Fibre-reinforced plastic composites - Determination of flexural properties 《纤维增强塑料复合材料 弯曲性能的测定》方法A
Flexural of fibre-reinforced plastic
弯曲
ISO 14126
Fibre- reinforced plastic composites—Determination of compressive properties in plane direction《纤维增强塑料复合材料 平面方向压缩性能的测定》
Compressive properties in plane direction of fibre- reinforced plastic
面内压缩
ISO 14129
Fibre reinforced plastic composites —Determination of the in-plane shear stress/shear strain response,including the in-plane shear modulus and strength,by the ±45° tension test method《纤维增强塑料复合材料的面内剪应力测定/剪切应变反应 面内剪切模量和强度的± 45 °拉伸试验方法》
In-plane shear properties of fibre- reinforced plastic
面内剪切
ISO 14130
Fibre reinforced plastic composites —Determination of apparent interlaminar shear strength by short-beam method《纤维增强塑料复合材料的表面层间短梁剪切强度测定方法》
Apparent interlamin-ar shear strength
表观层间剪切强度